Monday, January 30, 2017

High Tide Project Sheet


All images © 1990-2017 StampinUp!®
Supplies:
  • Stamp SetsHigh Tide (143006)
  • Card Stock – Whisper White (100730); Island Indigo (122923),
  • Stamp Pads – Crumb Cake (126975), Early Espresso (126974), Sahara Sand (126976), Pool Party (126982), Old Olive (126953), Island Indigo (126986)
  • Misc. – Stitched Shapes Thinlits (145372), Big Shot (104430), Dimensionals (104430), Post-it Note
Measurements:
  • Whisper White: 4-1/4” x 11”, 4” x 5-1/4” scrap piece
  • Island Indigo: 4-1/8” x 5-3/8”
Instructions:
  1. Stamp light house image onto Post-it Note. Trim around the image as close as possible.
  2. Place stamped Post-it Note onto Whisper White cardstock (4” x 5-1/4”) towards the left.
  3. Stamp scene over the Post-it note. Stamp the sand using Crumb Cake ink, the water image using Pool Party ink, both standing and flying birds using Early Espresso ink, and lastly the sea grass using Old Olive ink.
  4. Remove Post-it Note and stamp the lighthouse base image using Sahara Sand ink. Stamp over this using the more detailed lighthouse image with Island Indigo ink.
  5. Stamp the greeting onto a piece of Whisper White scrap using Early Espresso ink. Die cut using Stitched Shapes Thinlits square. Place onto card front using dimensionals.
  6. Attach card front onto Island Indigo cardstock using adhesive, then onto card base using Dimensionals. 

Want to re-create this project at home? Here's what you'll need to gather! Please feel free to click on any image below to go to my online stamp store and Shop with Debbie

CLICK TO SHOP - Product List

Thanks for stopping by,

Monday, January 23, 2017

Sealed with Love Frame Project Sheet

With Valentine's Day approaching, I'd like to share this framed artwork with you. This would make a great gift or a beautiful piece to hang on your own wall.  I hope you enjoy it.

Sealed with Love Frame
All images © 1990-2017 Stampin’ Up!®
Supplies:
  • Stamp SetsSealed with Love (142815)
  • Card Stock – Whisper White 12x12 (124302); Real Red (102482); Pool Party (122924); Red Glimmer Paper (121790); Silver Foil Sheets (132178)
  • Stamp Pads – Real Red (126949); Pool Party (126982); Tempting Turquoise (126952); VersaMark (102283)
  • Misc. – Sending Love DSP Stack (142733); Love Notes Framelits Dies (142752); Layering Squares Framelits Dies (141708); Mini Paper Clips Combo Pack (142766); Dimensionals (104430); Silver Emboss Powder (109131); 1” Circle Punch (119868); Owl Builder Punch (118074); Heat Tool (129056); Big Shot (143263); 9x9 Shadow Box Frame
Measurements:
  • Whisper White: 9” x 9; (4) pieces 2” x 2”; 1/2” x 1-1/2” (banner); scrap for die cuts
  • Pool Party: (5) pieces 2” x 2”; 2-3/4” x 1-1/4” (banner); scrap for die cuts
  • Real Red: (9) pieces 2-1/2” x 2-1/2” die cut with Scallop Square die; scrap for die cuts
  • Sending Love DSP Stack: partial sheets of red and white polka dots for die cuts
Instructions:
  1. Cut Scallop Squares out of Real Red Card Stock and adhere to 9x9 Whisper White Card Stock base
  2. Adhere Pool Party and Whisper White 2x2 card stock to scallop squares
  3. Square 1- Die cut 3D Heart from Red Glimmer Paper and snip inside heart out for square 9; Die cut Silver Foil Arrow; Stamp “sending love” in real red on whisper white scrap then punch out with 1” circle punch. Adhere circle with dimensional
  4. Square 2- Stamp “sealed with a kiss” in VersaMark ink, apply silver emboss powder and heat set. Stamp lips in Real Red ink.
  5. Square 3- Die cut Real Red Petal Card and fold 2 petals in to form heart pocket; die cut 3D heart from white polka dot DSP and use only the inside heart for liner. Stamp red heart on whisper white scrap and die cut it out. Stamp “love you lots” on whisper white banner in Real Red ink and cut banner end. Use dimensional on small red stamped/die cut heart
  6. Square 4- Die cut envelope from pool party card stock and liner from red polka dot DSP. Stamp row of hearts on scrap Whisper White then die cut. Add a paper clip
  7. Square 5- Die cut envelope from white polka dot DSP and small heart from Red Glimmer Paper.
  8. Square 6- Die cut envelope from pool party card stock. Stamp “love note” and small heart in square with Real Red ink. Die cut “love note” and fussy cut heart in square
  9. Square 7- Die cut Real Red Petal Card. Stamp “love” in Real Red ink then stamp line design inside in Pool Party ink and use Die to cut it out.
  10. Square 8- Stamp “hello love” on Pool Party card stock in Tempting Turquoise ink and cut end into banner. Punch heart from Owl Builder Punch out of Red Glimmer Paper.
  11. Square 9- Die cut stripe heart from Silver Foil Paper. Use inner Red Glimmer Heart from die cut in square 1.
  12. Once collage is adhered, insert into shadow box frame.

Want to re-create this project at home? Here's what you'll need to gather! Please feel free to click on any image below to go to my online store and Shop with Debbie!

Product List

Thanks for stopping by,

Saturday, January 14, 2017

Sealed with Love Project Sheet

Sealed with Love
All images © 1990-2017 Stampin’ Up!®
Supplies:
  • Stamp SetSealed with Love (142815)
  • Cardstock – Whisper White (100730); Pink Pirouette (111351); Real Red (102482)
  • Stamp Pads – Real Red (126949); Pink Pirouette (126956)
  • Misc. Sending Love DSP Stack (142733); Gold Foil Sheets (132622); Metallics Sequin Asst (138390); Stitched Shapes Framelits (145372); Love Notes Framelits (142752); Sponge Brayers (141714); Big Shot Machine (143263); Multipurpose Liquid Glue (110755)
Measurements:
  • Pink Pirouette: 5-1/2" x 8-1/2"
  • Whisper White: scraps for die cut stitched circle and envelope note
  • Real Red: scrap for die cut heart
  • Gold Foil Sheets: scraps for arrow and heart
  • Sending Love DSP Stack: 3" x 4" for small envelope
Instructions:
  1. Fold Pink Pirouette cardstock in half to create card base and run it through the Big Shot with the heart edgelit.
  2. Ink the Valentine greeting in Real Red and stamp in lower right corner.
  3. Crop the envelope, arrow, hearts and stitched shape circle with the Big Shot.
  4. Cut the center from the Real Red heart and adhere this and the Gold Foil heart to the back of the large circle.
  5. Using a Sponge Brayer, roll it in the Pink Pirouette ink and brayer over the inside envelope flap. Fold the envelope and secure the front flap with a small amount of Liquid Glue.
  6. Snip the arrow in half and add the two pieces to the pack of the small envelope and then to the circle. Add the circle to the front of the card.
  7. Ink small row of hearts and stamp on the envelope insert, add to envelope.
  8. Add three sequins where shown with Liquid Glue.

Want to re-create this project at home? Here's what you'll need to gather! Please feel free to click on any image below to go to my online stamp store and Shop with Debbie

Product List

Thanks for stopping by,